contact
  • Head Office
  • Tel: 0086-21-20236178
  • Fax: 0086-21-58974855
  • Add: No.19Fuqing Rd,Shanghai 201201,China
  • Postcode: 201201

    Online Message


    Name:

    Telephone:

    E-mail:

    Message:

Which Roller Mill suits for Ceramic grinding

From : clirik    Date : 2019-01-17 13:32

     Clirik Raymond Roller Mill is suitable to process various non-flammable and non-explosive mineral materials with Moh’s hardness less than 9.3 and humidity less than 6%, it is widely used in the fields of metallurgy, construction, chemical industry, mining, highway construction etc,. The granularity of the finished powder size can be adjusted between 50 and 325 mesh (315-45 micron). Clirik Raymond  roller mill is suitable to process quartz, feldspar, barite, calcite carbonate, limestone, talc, ceramic, iron ore, carborundum, bauxite, rock phosphate, coal and other materials, reaching about 400 kinds of materials in total. 

    A ceramic is an inorganic, nonmetallic solid prepared by the action of heat and subsequent cooling. Ceramic materials may have a crystalline or partly crystalline structure, or may be amorphous (e.g., a glass). Because most common ceramics are crystalline, the definition of ceramic is often restricted to inorganic crystalline materials, as opposed to the noncrystalline glasses, a distinction followed here. The ceramic needs a crush or a pulverize to fit in the application of construction or padding material.

   ramond mill
    Working features of YGM9517 Raymond Roll Mill:
    It has the similar working principle as Raymond mill, but its grinding device is fixed with 1000-1500kg pressure springs. When the machine works the grinding roller , which under the action of high pressure spring and centrifugal force, rolls close up to grinding ring, its rolling pressure is 1.2 times higher than that of Raymond mill given an identical condition and its capacity increase 20% to 30%; When the grinding roller and grinding ring, stable capacity and fineness are guaranteed.
 
    Working principle of YGM9517 Raymond Roll Mill :
    Large materials are crushed by jaw crusher to the required particle sizes, and carried by bucket elevator to the storage hopper, and are fed evenly and continuously by vibrating feeder into the main unit for grinding. The ground powder are carried by the airflow from the blower to the classifier to be classified, the particles which meet the fineness enter cyclone collector through pipe, and are separated and collected there. They are discharged at the discharging valve to become finished products; the airflow is sucked to the blower by return pipe on the top of cyclone collector. The whole airflow system is a sealed circulation, and is circulated under positive and negative air pressure.

Last:Raymond Roller Mill of Clirik stands out among powder mills

Next:Is Apatite Qualified to be Ground by MTM160 Raymond Mill

Copyright © 2013 Clirik All Rights Reserved