contact
  • Head Office
  • Tel: 0086-21-20236178
  • Fax: 0086-21-58974855
  • Add: No.19Fuqing Rd,Shanghai 201201,China
  • Postcode: 201201
    Online Message

    Name:
    *
    Telephone:
    *
    E-mail:
    *
    Message:

     

Jaw Crusher

Jaw Crusher

Product introduction:

The deep cavity fine jaw crusher series has the characteristics of large crushing ratio, uniform product size, simple structure, reliable operation, simple maintenance and economical operation. Therefore, the crusher is widely used in many s

PEX250x1000 deep cavity fine jaw crusher

  • PEX250x1000 deep cavity fine jaw crusher
 

Product description


Jaw crusher introduction:
The deep cavity fine jaw crusher series has the characteristics of large crushing ratio, uniform product size, simple structure, reliable operation, simple maintenance and economical operation. Therefore, the crusher is widely used in many sectors such as mining, smelting, building materials, roads, railways, water conservancy and chemical industries, and crushing various materials with compressive strength not exceeding 320 MPa.
Jaw crusher use and scope of use:
1. This series of crushers are mainly used in metallurgical, mining, chemical, cement, construction, refractory materials and ceramics industries for medium and fine crushing of various medium hard ores and rocks.
2. This series of crushers is suitable for crushing various soft and hard ores with compressive strength not higher than 300MPa (MPa). The blockage of the crushed materials shall not exceed the specifications in the technical parameter table.

 

Working principle of jaw crusher

The belt and pulley are driven by the motor, and the moving jaw is moved up and down by the eccentric shaft. When the moving jaw goes down, the angle between the fixed and the moving jaw becomes smaller, and the material is crushed and broken. Objective: When the moving jaw rises, the angle between the fixed jaw and the moving jaw becomes larger, and the moving jaw leaves the fixed plate under the action of the tie rod and the spring. At this time, the broken material is discharged from the lower mouth of the crushing chamber.

 

Performance characteristics of jaw crusher
 

1. Simple structure, easy to use and maintain; 
2. The crushing ratio is large, the product size is uniform; 
3. Stable performance, low cost of use; 
4. Low noise, less dust 
 

Technical Parameters of jaw crusher
 

Common small and medium models
Feed port size (mm)
Feed particle size (mm)
Discharge port adjustment range (mm)
Power (KW)
Production (t/h)
PE150x250
150x250
125
10-40
5.5-7.5
1-5
PE200x350
200x350
125
15-40
7.5-11
5-16
PE250x400
250x400
210
20-60
15-18.5
5-20
PE400x600
400x600
350
40-100
30-37
15-60
PE500x750
500x750
425
50-100
45-55
40-100
PE600x900
600x900
480
65-160
55-75
60-140
PEX250x400
250x400
210
≤12
15-18.5
5-10
PEX250x1000
250x1000
210
25-60
30-37
16-50
PEX250x1200
250x1200
210
25-60
37-45
20-60
PEX300x1300
300x1300
250
25-105
75
20-90

Copyright © 2013 Clirik All Rights Reserved