Zeolite roller mill,Raymond roller mill,Three-ring roller mill,Roller powder grinding mill,Calcium carbonate roller mill>

Jaw crusher is one of the most familiar crusher equipment. It is often used to crush stone. The feeding link is the first step in the operation of the jaw crusher. The effect of this step has a direct impact on the operation of the follow-up production. If the feeding link is not in the right way and timing, it may lead to the part. The damaged parts, causing the occurrence of the failure, thus affecting the normal production work, the following for you to explain the jaw crusher feeding link should pay attention to what?

1. Check the operation of the jaw crusher to see if the operation is good, whether there is noise, if the operation is normal, then feed operation. For the first time, we should follow the principle of small size material priority and gradually add.

2. During the feeding process, the operator should prevent materials or iron impurities which do not meet the technical parameters from entering the jaw crusher, so as to avoid the damage of the jaw crusher caused by overload operation and even the fracture of the jaw crusher.

3. After the jaw crusher stops working, it is necessary to pay attention to cleaning up the impurities in the feeding link, so as to avoid blocking phenomenon in the next operation.

It is the basis of guaranteeing the normal operation of jaw crusher to do well the work of feeding link. It needs the attention of feeding operator and the person in charge. Good cooperation is the key to improve the production efficiency.